Owon PC321 - Configure Network; Before Starting: Prerequisites; Adding to Gateway Network

9
P2
P1
Tips about the clamp:
• Cable diameter does not a󽗈ect usage as long as the cable can pass
through the clamp hole.
• The meter has three clamps which can be applied to cable devices
for separate measurement. If applied to the same cable, all clamps
will produce the same reading.
4.1 Before starting, you will need:
• A ZigBee Gateway.
• The Smartlift APP installed in a mobile phone .
4.2 Adding to the gateway's network：
Follow the steps below to join the power clamp to the gateway's
network:
1. Power on the Power Clamp, the LED indicator will start 󽗊ashing in
4
Con󽗉gure Network