WARNING SIGNS AND REGULATIONS
WARNING SIGNS AND REGULATIONS
LEVELS OF WARNINGS
Important instructions which concern technical safety and protection of persons
are emphasised as shown below.
!
WARNING
A warning indicates a hazardous situation which, if ignored, could result in
death or serious injury.
!
DANGER
This refers to working and operating procedures which must be complied
with in order to prevent damage to or destruction of material.
!
CAUTION
A caution indicates special precautions that must be taken to avoid damage
to the products or other property.
NOTE! Explanatory descriptions which help in understanding the relevant work
or operating procedure to be carried out.
REGULATIONS DESIGNED TO PREVENT ACCIDENTS
WITH PERSONAL INJURY AND DAMAGE TO ENGINE
Installation work may only be performed by authorised and skilled
personnel.
- Keep area surrounding engine, ladders and stairways free of oil and
grease. Accidents caused by slipping can have serious consequences.
- Persons must not stand under an engine suspended on a crane hook.
Keep liing gear in order.
- Wear close-fitting working clothes.
- During installation work, switch off the battery master switch.
- The engine may only be started and operated by authorised personnel.
- Always use genuine OXE Diesel parts only. Installation of “equally” good parts
from other suppliers may cause severe damage for which the workshop
carrying out the work is responsible.
- Use only OXE Diesel-approved service products (fuel, engine oil, anti-freeze
and anti-corrosion agent).
Pay attention to cleanliness. Diesel fuel must be free of water.