Oxford BenchMate E - Calibration Procedures

6.7.3 User ID
Steps :
1. Select Settings from applications.
2. Select User ID.
3. Select 1st character by using up / down arrow key and press OK.
You can select letters from alphabets, 1-9 number and few
symbols.
4. After pressing OK button, 2nd character will be highlighted.
Follow the same process till maximum character.
5. Once you will select the last character, display will show the setting
menu with all changes.
6.7.2 Sound
Steps :
1. Select Settings from the applications.
2. Select Sound.
3. Change the sound level by using the up/down arrow key and
press OK.
4. You will find the new selected sound on the display.
5. If you do not want to change sound, press the ESC key.
6.7.4 Product ID
Steps :
1. Select settings from applications.
2. Select Product ID.
3. Select 1st character by using up / down arrow key and press OK
button once you select 1st character. You can select letters from
the alphabet numbers 1-9 and few symbols.
4. After pressing the OK button, the 2nd character will be highlighted.
Follow the same process until maximum character limit is reached.
5. Once you will select the last character, the display will show the
setting menu with all changes.
-10-
6.8 Calibration
The Oxford Benchmate E pipette offers you 3 types of calibration
settings depending on the user’s requirement.
a.) 3 Point Calibration b.) 2 Point Calibration c.) 1 Point Calibration
By default 3 Point Calibration has been adjusted on the pipette for
supreme accuracy at each volume.