Oxford BenchMate E - Default Chapter; Table of Contents

Table of Contents :
-2-
1. Introduction 3
2. Volume Range 3
3. Before you start 3
4. Getting Started 3
5. Overview 4
6. Modes 4
6.1 Favourites 4
6.1.1 Edit 5
6.2 Pipetting 5
6.3 Reverse Pipetting 6
6.4 Multi Dispensing 6
6.4.1 Repeat Dispense 6
6.4.2 Auto Dispense 6
6.4.3 Sequence Dispense 7
6.5 Diluting 7
6.5.1 Diluting 7
6.5.2 Diluting + Mixing 8
6.6 Mixing 8
6.6.1 Mixing 8
6.6.2 Pipette + Mixing 9
6.6.3 Diluting + Mixing 9
6.7 Settings 9
6.7.1 Speed 9
6.7.2 Sound 10
6.7.3 User ID 10
6.7.4 Product ID 10
6.8 Calibration 10
6.8.1 3 Point Calibration 11
6.8.2 2 Point Calibration 11
6.8.3 1 Point Calibration 12
6.8.4 Restore Factory Calibration 12
6.8.5 Last Calibration Date 12
6.8.6 Due Calibration Date 13
6.8.7 Edit Password 13
6.8.8 Forgot Password 13
7. Warning / Safety Precautions 13
8. Battery and Charging 14
8.1 Inserting a battery 14
8.2 Charging through power adopter 14
8.3 Charging through charging pod 14
9. Technical Specification 15
9.1 Single channel pipette specification 15
9.2 Multi-channel pipette specification 15
10. Maintenance 16
10.1 Single channel pipette maintenance 16
10.1.1 Volume wise dis-assembly procedure 16-18
10.1.2 List of spares 19-21
10.2 Multichannel pipette maintenance 22
10.2.1 List of spares 23
10.2.2 List of spares 24
11. Autoclavability 25
12. Troubleshooting 25
Oxford Benchmate E
Electronic Pipette
User Guide