OXO Mistral 24 Instruction Manual

User Manual - Mistral 24 V1.2 05/2015 16/52
Modify a Step or Steps
• 1 - Enter Edit mode.
• 2 - Tap the Step button to scroll to the step you wish to mo-
dify.
• 3 - Press and hold the Up button if you want to raise the intensity.
If you want to lower the intensity, press and hold down the
Down button.
• 4 - While holding down the Up or Down button, tap the Flash
button corresponding to the DMX channel of the scene you
wish to modify until you reach the desired intensity value read
from the Segment Display. Then you may tap the Flash buttons
until you are satisfied with the new scene.
• 5 - Repeat steps 2, 3 and 4 until all the steps have been
modified.
• 6 - Exit Edit mode.
Running
Running Chase Programs
• 1 - Tap the Mode Select button to select CHNS SCENE
mode indicated by the red LED.

OXO Mistral 24 Specifications

General

Brand	OXO
Model	Mistral 24
Category	Recording Equipment
Language	English