Oxy Heli 5 - Chapter 3, Required Tools for Assembly

TOOLS REQUIRED
Chapter 3, Required Tools for assembly
1.5mm Hex Screw Driver
(High quality)
One Tools Required
2mm Hex Screw Driver
(High quality)
2.5mm Hex Screw Driver
(High quality)
Needle Nose Pliers
Uniball Pliers
Caliper
page 4
One Tools Required
Note :
We recommend high quality steel tools during assembly.
Hex Screw driver in particular must have precise Tip
Hexagonal dimension.
3mm Hex Screw Driver
(High quality)
One Tools Required
4mm Hex Tip Key L
(High quality)
Two Tools Required