Need help?Do you have a question about the Oxy Heli OXY 3 and is the answer not in the manual?
Lists key technical details of the helicopter, including dimensions and weight.
Rules for safe operation, including flying areas and proximity to people/animals.
Guidance on the assembly process, tool usage, and thread lock.
Instructions for installing the tail servo mount.
Assembly of the main frame using carbon fiber parts.
Assembly of the main frame using CNC components.
Final alignment and locking of the main frame panels.
Step-by-step guide for installing the helicopter motor.
Steps for installing the Electronic Speed Controller (ESC).
Instructions for installing the flybarless flight control system.
Procedure for adjusting the drive belt tension.
Installing the main gear and main shaft into the main frame.
Procedure for setting and checking belt tension.
Method for verifying correct belt tension.
Verifying the correct tail rotor rotation direction.
Further steps in the head assembly process.
Setup procedure for the front cyclic servo.
Setup procedure for the left and right cyclic servos.
Final steps for servo adjustment using the leveler tool.
To Next Page
General
