Ozito DMC-1000 - INFLATING SPORTING EQUIPMENT; HIGH VOLUME APPLICATION

7. HIGH VOLUME APPLICATION
DMC-1000
6. INFLATING SPORTING EQUIPMENT
5 Remove the adaptor
from the inated
item.
5 Remove the adaptor
from the inated
item.
1 Open the side
compartment and roll
out the air hose.
1 Remove the high
volume hose from
the base of the
compressor and
insert into the high
volume air outlet.
The air compressor is deisgned for quick and easy ination of high air
volume objects such as air matresses, rafts and pool toys.
3 Insert the connected
adaptor into the
inatable item.
3 Insert the connected
adaptor into the
inatable item.
4 Follow steps 2 - 3 in section 3.
“Inating” to inate the item.
4 Follow steps 2 - 3 in section 3.
“Inating” to inate the item.
6 Place the adaptors and air
hose back into thier original
compartments. Disconnect the
12V socket.
NOTE: The same proccess can be used to inate balloons using the
general purpose adaptors instead of the ball adaptor.
6 Place the adaptors and air
hose back into thier original
compartments. Disconnect the
12V socket.
2 Remove the ball adaptor from
the base of the compressor
and screw onto the end of the
air hose.
2 Attach the desired size adaptor
from the side compartment.
B
A
R
P
S
I
B
A
R
P
S
I