EasyManua.ls Logo

Ozito DMC-1000 - CLEANING & MAINTENANCE; DESCRIPTION OF SYMBOLS; CARING FOR THE ENVIRONMENT; SPARE PARTS

Ozito DMC-1000
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10. CLEANING & MAINTENANCE
DESCRIPTION OF SYMBOLS
CARING FOR THE ENVIRONMENT
Power tools that are no longer usable should not be disposed of
with household waste but in an environmentally friendly way. Please
recycle where facilities exist. Check with your local council authority
for recycling advice.
Recycling packaging reduces the need for landll and raw materials.
Reuse of recycled material decreases pollution in the environment.
Please recycle packaging where facilities exist. Check with your
local council authority for recycling advice.
Adaptors Kit SPDMC1000-08K
Spare parts can be ordered from the Special Orders Desk
at your local Bunnings Warehouse.
For further information, or any parts not listed here, visit
www.ozito.com.au or contact Ozito Customer Service:
Australia 1800 069 486
New Zealand 0508 069 486
E-mail: enquires@ozito.com.au
SPARE PARTS
Cleaning
• Keep the ventilation vents of the Compressor clean at all times, if
possible, prevent foreign matter from entering the vents.
After each use, blow air through the Compressor housing to ensure
it is free from all dust particles which may build up. Build up of dust
particles may cause the Compressor to overheat and fail.
• If the enclosure of the Compressor requires cleaning do not use
solvents but a moist soft cloth only. Never let any liquid get inside the
Compressor; never immerse any part of the Compressor into a liquid.
Note: Ozito Industries will not be responsible for any damage or
injuries caused by the repair of the Compressor by an unauthorised
person or by mishandling of the Compressor.
MAINTENANCE
Warning
Read instruction manual
V Volts W Watts
dc Direct current mA Milliamperes
Indoor use only
Electrical Emissions
Conformity (EMC)
WARNING: BEFORE CLEANING YOUR COMPRESSOR
OR CARRYING OUT ANY MAINTENANCE PROCEDURE,
ENSURE THE COMPRESSOR IS SWITCHED OFF AND
DISCONNECTED FROM THE POWER SUPPLY.
IMPORTANT: STORE THE COMPRESSOR ONLY IN A DRY
LOCATION WHICH IS NOT ACCESSIBLE TO UNAUTHORISED
PERSONS. ALWAYS STORE UPRIGHT, NEVER TILTED!
WARNING: WAIT UNTIL THE COMPRESSOR HAS
COMPLETELY COOLED DOWN TO PREVENT BURNS.

Related product manuals