ONLINE MANUAL
Scan this QR Code with your
mobile device to take you to
the online manual.
0
1
2
3
4
5
6
Bar
This constant pressure pump is designed for pumping clean water in
the house and garden. It is ideal for providing domestic water supply to
laundries, toilets and outdoor taps, combined with a trigger nozzle and
hose for garden watering and washing cars. Tested to AS/NZS 4020
as suitable for use in contact with drinking water.
Your pump requires no assembly before use other than the connection
of suitable inlet/outlet hose or pipe adaptors (not included).
Positioning the pump
The device must be placed on a
horizontal, level surface that is
sufciently capable of supporting
the total weight of the device
when lled with water.
Four mounting recesses
allow for xing the base to the
mounting surface (bolts not
supplied).
Note: The installation site must be well ventilated and protected from
the effects of weather.
Note: When operating indoors you must ensure that there is a drain in
the oor or a mechanism to prevent leakage.
1. Suction inlet
2. Pressure gauge
3. Priming plug
4. Discharge outlet
5. Carry handle
6. On button
7. Indicator lights
8. Water drain plug
9. Mounting recesses
10. Base
POTABLE PRESSURE PUMP
KNOW YOUR PRODUCT
1. SETTING UP
SETUP & PREPARATION
WARNING!: ENSURE THE PUMP IS DISCONNECTED
FROM THE POWER SUPPLY BEFORE PERFORMING
ANY OF THE FOLLOWING OPERATIONS.
1
8 9 10
4 5 6 732
To Next Page
Loading...
