OZtrail FAST FRAME BLOCKOUT User Manual

WARNING
AVOID CONTACT WITH OPEN FLAMES:
This tent is manufactured to meet CPAI-84 Fire Retardant
standards. The fabric may burn if in continuous contact with
open flame sources.
CONDENSATION IS NOT LEAKING:
Minimise condensation by ensuring your tent is well
ventilated through windows, doors or vents.
STITCH LINE
TENT OWNERS MANUAL
B LOCK OUT FAST FR AME 6 P ER S ON
BEFORE YOU BEGIN
• This tent requires a minimum of two people to set up
• Read all the instructions before setting up your tent.
Check parts list to ensure you have full contents
• Find a Flat area for your tent, free from rocks, potholes
and branches
• Ensure that you use all pegs, ropes and additional poles only
as instructed
• If conditions are windy, arrange tent as to have narrowest
side of tent facing into the wind
• Keep away from Open Flames, DO NOT USE Stoves
or Burning Appliances inside the tent
STORAGE
• To maximise the life of your tent, always ensure it is clean of
dirt and debris.
• Never store if wet or damp. Consider airing your tent at home
after your trip and allow to completely dry before storing
between trips
• Continued exposure to sunlight can degrade the polyesters
used to make tents. Always store your tent in its storage bag,
away from direct light in a cool, dry space
CONTENTS
• Inner Tent x 1
• Rain Fly x 1
• Front Vestibule Pole x 1
• Rear Vestibule Pole x 1
• Steel Portico Poles x 2
• Steel Awning Poles x 2
• Pegs x 26
• Guy Ropes x 8
WARRANTY - For details see www.oztrail.com.au/warranty
SEE OTHER SIDE FOR PITCHING INSTRUCTIONS
DuraPlus Front Vestibule Pole x 1:
Steel Awning Pole x 2:
Steel Portico Pole x 2:
DuraPlus Rear Vestibule Pole x 1:
OZtrail
®
is a registered trademark of
Adventure Trading Australia Pty Ltd
Designed & Imported by:
Adventure Trading Australia Pty Ltd
71 Charles Ulm Place,
Eagle Farm, QLD 4009
AUSTRALIA
Made in Bangladesh

OZtrail FAST FRAME BLOCKOUT Specifications

General

Material	Polyester
Blockout Technology	Yes
UV Protection	Yes
Frame Material	Steel
Setup Time	5 minutes
Features	Blockout Technology
Frame	Fast Frame
Capacity	Varies by model (4 person, 6 person, 10 person, etc.)

Summary

Tent Warnings and Important Information

Avoid Contact with Open Flames

Tent fabric may burn if in continuous contact with open flame sources.

Condensation is Not Leaking

Minimise condensation by ensuring your tent is well ventilated through windows, doors or vents.

Tent Setup Instructions

Step 1: Layout the Inner Tent

Unfold the inner tent, outstretch it over a flat, clear area, and arrange the door for entry.

Step 2: Erect the Inner Tent Frame

Locate lower leg sections, raise to vertical, extend legs until locked, and repeat for other legs.

Step 3: Put On the Fly

Place rain fly over inner tent, thread vestibule poles through sleeves, and connect poles.

Step 4: Secure Fly to Inner Tent

Secure fly with Velcro tabs and connect buckles on tent corners.

Step 5: Assemble the Awnings

Use awning poles and ropes to suspend door panel overhead, and peg out the tent and fly.

Step 6: Always Peg Out and Use Guy Ropes

In windy/rainy conditions, dismantle awnings, close doors, and set out guy ropes.