OZtrail FAST FRAME User Manual

WARNING
AVOID CONTACT WITH OPEN FLAMES:
This tent is manufactured to meet CPAI-84 Fire Retardant
standards. The fabric may burn if in continuous contact with
open flame sources.
CONDENSATION IS NOT LEAKING:
Minimise condensation by ensuring your tent is well
ventilated through windows, doors or vents.
STITCH LINE
TENT OWNERS MANUAL
FAST FR AME 10 P ER S ON
BEFORE YOU BEGIN
• This tent requires a minimum of two people to set up
• Read all the instructions before setting up your tent.
Check parts list to ensure you have full contents
• Find a Flat area for your tent, free from rocks, potholes
and branches
• Ensure that you use all pegs, ropes and additional poles only
as instructed
• If conditions are windy, arrange tent as to have narrowest
side of tent facing into the wind
• Keep away from Open Flames, DO NOT USE Stoves
or Burning Appliances inside the tent
STORAGE
• To maximise the life of your tent, always ensure it is clean of
dirt and debris.
• Never store if wet or damp. Consider airing your tent at home
after your trip and allow to completely dry before storing
between trips
• Continued exposure to sunlight can degrade the polyesters
used to make tents. Always store your tent in its storage bag,
away from direct light in a cool, dry space
CONTENTS
• Inner Tent x 1
• Rain fly x 1
• Awning poles x 5
• Pegs x 31
• Guy Ropes x 10
WARRANTY - For details see www.oztrail.com.au/warranty
SEE OTHER SIDE FOR PITCHING INSTRUCTIONS
Steel Awning Pole x 5:
OZtrail
®
is a registered trademark of
Adventure Trading Australia Pty Ltd
Designed & Imported by:
Adventure Trading Australia Pty Ltd
71 Charles Ulm Place,
Eagle Farm, QLD 4009
AUSTRALIA
Made in Bangladesh

OZtrail FAST FRAME Specifications

General

Brand	OZtrail
Model	FAST FRAME
Category	Tent
Language	English

Summary

Tent Safety and Care

Avoid Contact with Open Flames

Tent fabric meets CPAI-84 standards but may burn if in continuous contact with open flame sources.

Condensation Management

Minimize condensation by ensuring the tent is well ventilated through windows, doors, or vents.

Tent Storage Guidelines

Store tent clean and dry. Avoid prolonged sunlight exposure to prevent degradation of materials.

Fast Frame Tent Setup Instructions

Step 1: Layout the Inner Tent

Unfold and position the inner tent on a clear, flat area, aligning the door for entry.

Step 2: Raise the Roof

Locate roof poles and lift them upwards to a horizontal position to partially erect the frame.

Step 3: Erect the Frame

Extend vertical frame legs until they click into place, then repeat for all legs.

Step 4: Secure Fly to Inner Tent

Drape the rain fly over the inner tent and secure it using Velcro tabs and buckles.

Step 5: Assemble the Awnings

Use awning poles and additional ropes to suspend the door panel overhead and peg out the tent.

Step 6: Peg Out and Use Guy Ropes

In windy/rainy conditions, dismantle awnings, close doors, and set out guy ropes.