14
OIL CAPACITIES:
(PD12C/PD15B) 01, 02 & 22 DRUM - 6 PINTS (2.8 L) (PD12C/PD15B) 04, 05 & 23G DRUM - 7 PINTS (3.3 L)
(PD12C/PD15B) 06 DRUM - 18 PINTS (8.6 L) (PD12C/PD15B) 24G & 25G DRUM - 11.5 PINTS (5.4 L)
NOTE: Capacities are approximate. Refer to “Oil Level” earlier in this section of the manual.
RECOMMENDED GEAR OIL
Shaded temperature range in the chart above is not recommended for severe applications
such as sustained fast duty cycles or frequent winching/hoisting.
Mobil Shell Chevron
Range A Mobilgear 600 XP 200 Omala S2 GX 220 Gear Compounds EP 220 or Meropa 220
Range B Mobilgear 600 XP 150 Omala S2 GX 150 Gear Compounds EP 150 or Meropa 150
Range C Mobilgear SHC 150 Omala S4 GX 150
PACCAR Winch winches/hoists are factory lled with Mobilgear 600 XP 150 or equivalent. Consult with your oil supplier
for equivalent oil options as required.
PREVAILING AMBIENT TEMPERATURE
NOTE: A warm-up procedure is recommended at each start-up and is essential at ambient temperatures below
40°F (4°C).
Oil viscosity is aected by ambient temperature and is critical to reliable brake clutch operation. Tests indicate that excessively
heavy or thick gear oil may contribute to intermittent brake clutch slippage. Ensure the gear oil viscosity used in your hoist is
appropriate for the prevailing ambient temperature.
Failure to use the proper type and viscosity of planetary
gear oil may contribute to intermittent brake clutch slippage,
which could result in the sudden loss of load control, property
damage, serious injury or death.
Some gear lubricants contain large amounts of EP (Extreme
Pressure) and anti-friction additives, which may contribute
to brake clutch slippage or damage to brake friction discs
or seals. DO NOT use oil labeled as meeting “API Service
GL-5.”
To Next Page
Loading...
