Need help?Do you have a question about the Pace 5168N and is the answer not in the manual?
Broadband Network Interfaces| Integrated Bonded ADSL2+/VDSL2 Modems | 1 RJ-14 |
|---|---|
| Gigabit Ethernet | 1 RJ-45 |
| Ethernet Ports | 4 RJ-45 |
High Powered Wireless Functionality| Wireless Standard | IEEE 802.11n 2x2 2.4GHz |
|---|---|
| Power Settings | 10 settings, up to 25 +/- 1dBm |
| Wireless Security | WEP64, WEP128, WPA, WPA2 |
Physical Specifications| Dimensions with Stand | 3.1” x 9.6” x 9.7” (7.8 cm x 24.3 cm x 24.5 cm) |
|---|---|
| Dimensions without Stand | 1.6” x 8.7” x 8.9” (4.0 cm x 22.1 cm x 24.6 cm) |
| Weight | 1.6 lbs (.70 kg) |
Power Supply| External Power Supply Voltage | 12V |
|---|---|
| External Power Supply Current | 3A |
| AC Plug Type | 2-prong ungrounded non-polarized |
Memory| Flash Memory | Up to 128MB (64MB standard) |
|---|---|
| RAM | Up to 256MB (128MB standard) |
| USB Host Interface | 1 USB 2.0 |
Operating Environment| Operating Temperature | 32° to 104° F (0° to 40° C) |
|---|---|
| Operating Humidity | 5% to 95%, non-condensing |
| Operating Altitude | -197’ – 6, 000’ MSL |
Details the gateway's 802.11b/g/n wireless and wired Ethernet ports for home networking.
Explains how the gateway's wireless technology minimizes 'cold spots' for better coverage.
Covers the gateway's built-in VoIP capabilities and support for various voice convergence services.
Describes the gateway's fast data transfer speeds for seamless network performance.
Explains the firewall's role in detecting and defending against common Internet threats using Stateful Packet Inspection.
Lists essential items required for the gateway's installation, including hardware and cables.
Provides guidance on selecting an optimal placement for the gateway to ensure signal quality and performance.
Presents a comparative table of features across different gateway models described in the document.
An outline of the steps involved in installing the gateway, with page references for each step.
Diagrams illustrating DSL and Ethernet broadband connection methods for the gateway.
Detailed steps for connecting the gateway's power adapter to the device and a power source.
Instructions for connecting computers and other devices to the gateway using Ethernet cables.
Steps to connect wireless devices to the gateway's integrated access point, including WPS methods.
Guidance on establishing an Internet connection via DSL or Ethernet ports.
Instructions for connecting up to two VoIP telephones to the gateway's RJ-14 ports.
Steps to connect an IPTV set-top box to the gateway for IPTV service using an Ethernet port.
Resolving common problems related to Local Area Network (LAN) connectivity, such as IP address or signal issues.
Troubleshooting connectivity problems indicated by power, broadband, or service lights on the gateway.
Addressing common problems with Voice over Internet Protocol (VoIP) services, including phone line and dial tone issues.
Statement of the product's adherence to regulatory standards and compliance guidelines.
Details the gateway's compliance with FCC and Industry Canada regulations for radio and telecommunications.
Specifics on compliance with FCC Part 15 rules and Industry Canada license-exempt radio standards.
Covers compliance with telecommunication requirements from TIA-968 (FCC Part 68) and Industry Canada CS-03.
Information regarding radio frequency (RF) exposure limits and compliance, including MPE and SAR.
General safety instructions for the product, including handling the AC adapter and ensuring proper ventilation.
Advice on using correct telecommunication cords and UL Listed connections for VoIP ports.
Guidance on repairs, avoiding water/electrical hazards, and environmental placement for optimal operation.
To Next Page
