Pace TDC777D - Connecting Equipment to the Wall AC Outlets; Connecting the Power Cord to Your Set-Top

10
TDC777D OPERATOR’S MANUAL (501-3432100)
CONNECTING THE EQUIPMENT (cont.)
WARNINGS
Do not connect your set-top (or any other equipment such as a TV or VCR) to the power supply until you
have properly connected all the other cables.
The power cords you use may be fitted with polarized plugs. Do not defeat the safety purpose of these
polarized plugs.
Connecting the power cord to your set-top
Before you connect your set-top to a wall AC outlet, connect the polarized socket on the set-top’s power cord
into the POWER INPUT connector on your set-top’s rear panel.
Connecting equipment to the wall AC outlets
Connect the plugs on the power cords from your set-top, VCR, and any other equipment into wall AC outlets.
If these outlets have switches, switch them ON.