32 -
EDR 2000 DVD Recorder User's Guide
SPECIFICATIONS
Cannot record
• The TV channel you want to record is not saved yet, or you have chosen
wrong channel number. Please check the saved channels.
• The disc is write protected. Remove the written protection or change a disc.
• The disc is a closed DVD+R disc. Change a disc.
• TV system mismatch. Please make sure the disc has not been recorded in dif-
ferent video format (e.g. PAL or NTSC). The DVD Recorder does not support
recordings of different video format on the same DVD+R/RW disc.
• The disc you use may not conform to the DVD+R/RW standards.
• The recorder does not record to CD-R/RW, DVD-RAM or DVD-R/RW discs.
• Please make sure the disc has not been used in a computer before.
Time recording
does not work
• The date or time is not correctly set, please check the date and time.
• The time schedule is not correctly set, please check the time schedule.
• The disc is locked. Unlock the disc.
• The disc is a closed DVD+R disc. Change the disc.
DVD±RW disc
cannot be edited
• The disc is locked. Press the DVD button on the remote control and select
Unlock Disc to unlock the disc.
TV signal has
picture or sound
interference
• Check the aerial.
• Check the selected TV system in the system menu. In mainland Europe, the
TV system should be PAL or SECAM.
Distorted picture
or black and
white picture
• The disc's colour system does not match the TV's colour system.
• The signal is not a colour signal.
No digital audio
output
• Check whether the digital input connectors match the external instruments'
output connectors.
Power supply AC110-240V 50Hz
Power consumption 40W
Power consumption (standby) 3W
Size (mm) 430 x 48 x 308
Weight approximately 4.0 kg
Humidity 15~75%
EDR-2000-UG.book Page 32 Jeudi, 20. octobre 2005 8:32 08
To Next Page
Loading...