What to do if there is no live video on PACOM DVR?
First, check the camera video cable and its connections. Then, check the monitor video cable and connections. After that, confirm that the camera has power and check the camera lens settings.
How to fix PACOM DVR when there is no power?
Check the power cord connections and confirm that there is power at the outlet.
Covers reading, retaining instructions, cleaning, attachments, water, ventilation, and stability.
Guidelines on power sources, cords, lightning surges, and overloading.
Procedures for servicing, handling damage, and using replacement parts.
Covers field installation, ambient temperature, airflow, mechanical loading, and battery warnings.
Lists items included in the package and necessary installation tools.
Introduces the DVR's front panel layout and button functions.
Steps for turning on the DVR and starting the initial configuration.
Describes the main setup screen and the virtual keyboard interface.
Checking hard disk capacity, bad sectors, and SMART status.
Adding, deleting, and managing user accounts and groups.
How to safely shut down or log out the DVR system.
Introduction to network configuration options.
Setting IP address, gateway, subnet mask, and DNS server manually.
Introduction to configuring connected devices.
Setting up cameras, assigning titles, and defining display usage.
Setting up ports and products for remote keyboard control.
Introduction to the DVR's flexible recording modes.
Setting up basic recording schedules.
Setting up detailed recording schedules per event.
Introduction to detecting and reacting to various events.
Setting up and titling alarm inputs.
Enabling and configuring motion detection for each camera.
Setting sensitivity levels for daytime and nighttime motion detection.
Selecting specific areas within the camera view for motion detection.
Defining what happens when motion is detected: record, alarm, notify, PTZ.
Configuring detection of video signal loss or obscuration.
Defining responses to video loss events.
Configuring the DVR to receive text input from devices like ATMs.
Steps for powering on the DVR and initial live camera view.
Entering and operating the PTZ camera control interface.
Controlling the DVR via a USB mouse for navigation and interaction.
Understanding how video recording starts based on setup.
Navigating to the search menu to find recorded footage.
Searching video by specifying a date and time.
Solutions for issues related to power and live video display.
Solutions for VGA monitor detection and DVR recording problems.
To Next Page
General
