Why has my PACOM DVR stopped recording?
Your PACOM DVR may have stopped recording because the hard disk drive is full. To resolve this, you can either delete video files or set the DVR to Overwrite Mode.
What to do if there is no live video on my PACOM DVR?
If you're experiencing no live video on your PACOM DVR, try the following: * Check the camera video cable and connections. * Check the monitor video cable and connections. * Confirm that the camera has power. * Check the camera lens settings.
How to fix no power issue on PACOM PDR960H-16RT DVR?
If your PACOM DVR has no power, check the power cord connections and ensure that there is power at the outlet.
What to do if there is no live video on the VGA monitor connected to my PACOM PDR960H-16RT DVR?
If the VGA monitor doesn't display live video from your PACOM DVR, and the DVR does not detect a VGA monitor automatically, press and hold the PANIC button on the front panel or remote control for 5 seconds or longer. This should switch the video output from Video out to VGA out.
Why is the live video on my PACOM PDR960H-16RT very bright?
If the live video on your PACOM DVR is too bright, and if a cable is attached to the 'Loop' connector, ensure it is connected to a properly terminated device.
What does it mean if the icon displays, however, the PACOM DVR is not recording?
If the yellow icon displays, but your PACOM DVR is not recording, it indicates that the DVR is in the Pre-Event recording mode. The yellow icon appears when there is no event, meaning the DVR isn't actively recording. The red icon appears when an event occurs, and the DVR starts recording.
How to troubleshoot a PACOM PDR960H-16RT DVR with no power?
If your PACOM DVR has no power, check the power cord connections and confirm that there is power at the outlet.
What to do if my PACOM PDR960H-16RT keeps rebooting during the upgrade?
If your PACOM DVR keeps rebooting and the upgrade fails, the current system version might be higher than the upgrade package file version. Reset the DVR using the Factory Reset. Keep in mind that using the Factory Reset will erase any saved settings.
Why is the live video very bright on my PACOM PDR960H-16RT?
If the live video on your PACOM DVR is very bright, and a cable is attached to the “Loop” connector, ensure it is connected to a properly terminated device.
Lists the DVR's capabilities and offerings.
Explains the DVR's technology and advantages over VCRs.
Lists DVR package items and required setup tools.
Details BNC connections for video input and loop through.
Describes RCA, eSATA, and terminal block connections.
Covers RS485, RS232 ports, and Factory Reset.
Explains Video Out, Network Port, and Power Cord.
Describes physical buttons and indicators on the DVR.
Details operation of buttons like Camera, Playback, Menu.
Covers remote operation and first-time DVR configuration.
Details settings for Date/Time, User, Storage, Network.
Covers DVR startup and initial video display.
Explains how to use the on-screen menu for monitoring.
Describes sequential viewing and camera-specific settings.
Details how to find recorded video using various search methods.
Covers recording modes, panic recording, and audio capture.
Explains playback controls and Triplex mode operation.
Guides on formatting USB drives for DVR use.
Provides examples for searching text input data.
Addresses problems with power and live video display.
Solves issues with recording, system reboots, and upgrade failures.
Details signal format, input, output, resolution, and speed.
Lists connector types, storage, and physical specs.
Placeholder for model and serial number.
Notes on installation, ventilation, and environmental conditions.
Defines key terms used in the warranty.
Outlines terms, consumer rights, and limitations.
To Next Page
General