What to do if there is no live video on my PACOM PDRH-440?
If you're not seeing any live video on your PACOM DVR, there are several things to check: First, examine the camera video cable and its connections. Next, verify the monitor video cable and connections. Also, confirm that the camera is receiving power. Finally, check the camera lens settings.
Why has my PACOM PDRH-440 DVR stopped recording?
If your PACOM DVR has stopped recording, it might be because the hard disk drive is full. To fix this, you can either delete some video files to free up space or set the DVR to Overwrite Mode, which will automatically record over older footage.
How to troubleshoot a PACOM DVR with no power?
If your PACOM DVR has no power, begin by checking the power cord connections to ensure they are secure. Then, confirm that the power outlet is providing electricity.
General| Model | PDRH-440 |
|---|---|
| Video Input Channels | 4 |
| Video Input | BNC |
| Video Output | BNC, VGA |
| Storage Capacity | Up to 2TB |
| Compression Format | H.264 |
| Power Supply | 12VDC |
| Operating System | Embedded Linux |
| Hard Drive | SATA HDD |
| Network Interface | RJ45 |
Covers system information, date/time, storage, user accounts, and shutdown.
Details network configuration, including IP, DNS, and notification settings.
Explains how to configure cameras, audio, alarms, display, and remote control.
Covers settings for recording modes, schedules, and pre-event recording.
Details how to configure DVR responses to various events like alarms, motion, and video loss.
Instructions on recording video/audio and playing back recorded footage.
Guides on searching recorded video by various criteria and exporting clips.
Provides solutions for common issues like power, video, and recording failures.
To Next Page
