Why has my PACOM PDR960H-8RT DVR stopped recording?
Your PACOM DVR may have stopped recording because the hard disk drive is full. To resolve this, you can either delete video files or set the DVR to Overwrite Mode.
What to do if there is no live video on my PACOM DVR?
If you're experiencing no live video on your PACOM DVR, try the following: * Check the camera video cable and connections. * Check the monitor video cable and connections. * Confirm that the camera has power. * Check the camera lens settings.
How to fix no power issue on PACOM DVR?
If your PACOM DVR has no power, check the power cord connections and ensure that there is power at the outlet.
What to do if there is no live video on the VGA monitor connected to my PACOM PDR960H-8RT?
If the VGA monitor doesn't display live video from your PACOM DVR, and the DVR does not detect a VGA monitor automatically, press and hold the PANIC button on the front panel or remote control for 5 seconds or longer. This should switch the video output from Video out to VGA out.
Why is the live video on my PACOM PDR960H-8RT very bright?
If the live video on your PACOM DVR is too bright, and if a cable is attached to the 'Loop' connector, ensure it is connected to a properly terminated device.
What does it mean if the icon displays, however, the PACOM DVR is not recording?
If the yellow icon displays, but your PACOM DVR is not recording, it indicates that the DVR is in the Pre-Event recording mode. The yellow icon appears when there is no event, meaning the DVR isn't actively recording. The red icon appears when an event occurs, and the DVR starts recording.
How to troubleshoot a PACOM PDR960H-8RT DVR with no power?
If your PACOM DVR has no power, check the power cord connections and confirm that there is power at the outlet.
What to do if my PACOM PDR960H-8RT DVR keeps rebooting during the upgrade?
If your PACOM DVR keeps rebooting and the upgrade fails, the current system version might be higher than the upgrade package file version. Reset the DVR using the Factory Reset. Keep in mind that using the Factory Reset will erase any saved settings.
Why is the live video very bright on my PACOM DVR?
If the live video on your PACOM DVR is very bright, and a cable is attached to the “Loop” connector, ensure it is connected to a properly terminated device.
Comprehensive list of safety and operating instructions for the equipment.
Describes front panel buttons and LEDs.
Describes Panic, Alarm, Clip Copy, Zoom/PTZ, Display/Spot, Group/Sequence, Playback buttons.
Guides through the first-time setup process.
Configures site name, ID, language, system logs.
Configures system date, time, and time zone.
Manages user accounts and permissions.
Configures storage devices and formatting.
Configures general recording parameters.
Sets up recording schedules.
Configures motion detection parameters.
Configures alarm input settings.
Configures video loss detection.
Configures video blind detection.
Configures text input device settings.
Configures camera titles, modes, and resolutions.
Explains how to view live video.
How to play back recorded video.
How to search for recorded video.
Details Event Log, Record Table, Motion, Text-In searches.
Covers other search operations like Export, Status, Data Source, Exit.
Lists common issues and their solutions.
Details the terms and conditions of the product warranty.
General| Video Input | 8 channels |
|---|---|
| Compression Format | H.264 |
| Network Interface | RJ45 |
| Operating System | Embedded Linux |
| Channels | 8 |
| Power Supply | DC 12V |
| Recording Resolution | 960H |
| Hard Drive Support | 1 SATA HDD |
| Audio Output | 1 channel |
| Mobile Support | Yes |
| USB Port | 2 x USB 2.0 |
To Next Page