PACOM 8-Channel User Manual

Details the tools needed for DVR installation, noting that no special tools are generally required.

Describes the functions of the DVR's front panel buttons and controls for setup and daily operations.

Guides the user through the initial setup process for the DVR, including time, date, and network.

Accesses various system configuration menus like Information, Date/Time, Storage, User, and Wizard.

Configure site name, System ID, language, software version, and upgrade the DVR software.

Set the system date, time, time zone, and daylight saving time for accurate recording.

Provides a guided setup for basic DVR operation and network configuration.

Step-by-step guide for initial DVR setup including date/time, recording method, and quality.

Configure network settings for remote access, connectivity, and Internet connection.

Set up motion detection sensitivity, zones, and actions for each camera.

Displays live video feed from all connected cameras and allows basic control.

Exits live monitoring and enters the search mode for reviewing recorded video.

Explains recording modes, resolution, speed settings, and recycle options.

How to view recorded video using the PLAYBACK button and Triplex mode.

How to copy video clips to DVD or USB drives for backup or review.

Solutions for issues when the DVR does not power on, checking cord and outlet.

Solutions for problems with no live video feed, checking cables and camera power.

Solutions when the DVR stops recording, often due to full hard disk or overwrite mode.