20
" for more than 3-5 seconds at a time, otherwise the battery
1. Don't
press the start button "
may discharge prematurely
2.Release the starter button immediately after the engine has started.
3.Don't
press the starter button while the engine is running, otherwise it may adversely affect the
engine.
4.Allow the motorcycle to sit for several minutes when the engine fails to start after three
consecutive attempts, otherwise the battery may be damaged or drained.
[Preparing to ride]
Insert the ignition key and turn it clockwise 90 degrees to unlock the lock, and turn the ignition
switch(left/right). Turn the fuel switch handle to " ", and turn engine cut-off switch to " ".
Shift the gear to the neutral position with neutral gear indicator on (green), or shift to any gear,
grasp the clutch lever and start the engine.
[Electric Starting]
Press the electric starter button " " Do not roll the throttle before starting. Rolling the
throttle before starting the motorcycle is unnecessary.
NOTE:
To Next Page
Loading...