¢ÙDrain screw
¢ÚOil filter screen
24
[Engine oil change and oil filter clean]
Warm up the engine and drain the engine oil after
cutting off the engine.
Place an empty container under the engine.
Unscrew the drain screw to drain the oil
completely and then tighten the drain screw.
Add 1.9L of new oil.
If you go to a PAGSTA service dealer, you can ask
the servicemen to open the right crank case and
remove the oil filter screen for cleaning.
NOTE: When riding on dusty areas, you should
change the engine oil and clean the oil filter more
frequently.
To Next Page
Loading...