P2 User Manual Version 1.0
11
Reply or AutoPing Report Email Address: This is an additional email address that is used in SMTP testing,
Autoping report, and alarm report. There are no limitations on the types of destination email servers. A web
based emailing system or SMTP can be used.
Outgoing Email Authentication SMTP: If an SMTP (outgoing) email requires a user name and password
authentication, select “Y” for this entry.
Check Email Interval (Seconds): This entry specifies how often the system checks incoming emails. The
interval unit is seconds.
Access Control List (ACL) Enable: Enable or disable controlling client IP addresses to access the system.
Network Connection Check Using This IP: This entry specifies an IP address or a URL that the P2 will ping
periodically for verification of network connectivity if the network connection is down or inactive, and
“AutoPing” is in off mode.
Get SNMP MIB File: This is the “Management Information Base” text file, which collects, stores
management information, and makes this information available to NMS (Network Management System).
To Next Page
Loading...