P2 User Manual Version 1.0
5
Web Interface
Open your preferred web browser and type in the P2’s IP address in the address bar.
IP Address: 192.168.1.210
You will be prompted to enter a User ID and a Password. Use the following:
Default ID: pakedge
Password: pakedgep
System Operation Status
Displays the Current for the P2’s circuit. The System Status window will also display
characteristics of each port, like the port number, Power On Delay, and the status of the Port. If
the status is green, the port is On, and if it is red then the port is Off.
To Next Page
Loading...