7
Setting up the machine
30
ubject to change without notice
Position photocells
1. Fix the photocells between the round belts.
Ö On both outside streams
2. All belts must run freely.
3. Ensure that the round belts do not touch the photocells or their cables.
4. Ensure that there are no round belts under the photocell.
Ö The diode on the photocell does not light up
Adjustment for large formats
&
For large formats, the products cannot be fed into the middle of the shaft.
The band is then no longer in the middle of the product. This has no
adverse effect on functionality.
Round belts, large product, top view
7.2 Presse drive
The round belts and the folding machine must run at the same speed. This guarantees
trouble-free transfer of the products.
1. Adjust the speed using the press drive inching switch.
With the machine started
2. The difference in speed between the production machine and the delivery may
not be more than 10%.
3. Speed is shown in the display.
To Next Page
Loading...