OPERATING MANUAL CD 2000
Palas
®
GmbH, Karlsruhe, Version V002022014
6. Malfunctions
If the discharging of the particle is not sufficient then please check if the electrical control
unit has electrical power.
If other malfunctions may arise, please contact manufacturer.
Palas GmbH
Greschbachstr. 3b
76229 Karlsruhe, Germany
Telephone: +49 (0)721/96 21 30
E-mail: support@palas.de
(please indicate the serial number of the instrument within the email)
A device that obviously does not function perfectly may not be operated further!
6.1 FAQs
Table with known questions:
(Questions are currently being collected and will be listed in the next revision of this
document)
6.2 General
No components may be serviced or replaced in the discharge system CD 2000 without
instruction from a Palas® employee. In the event of infringement, the customer loses their
warranty claims; in addition Palas® is not liable for the damage arising.
In case of problems with the discharge system CD 2000 please contact Palas® GmbH (Tel.:
0721/96 213-0).