To Next Page

To Previous Page

 OPERATING PARAMETERS

Stove operation is determined by the Power level, Fan and Temperature parameters set by the user.

 

The power level denes the amount of heat produced by the stove and consequently directly a󰀨ects fuel

consumption.

To change the power level:

a) Use the buttons to go to the power menu and press ;

b) The power level value will ash; set the value using the (buttons (1 minimum,....5 maximum)

c) Press to conrm the settings.

 

To modify the fan speed:

a) Use the keys to move through the ventilation menu and press the key;

b) Use the

keys to move between the central fan [c], the right fan [r] and the left fan [L];

a) Press the

key to select the fan required;

b) Selecting the central fan [c], change its value with the

keys:

• ”OFF” = excludes ventilation completely and the heater will only work by natural convection;

• ”1” minimum ... ”5” maximum;

• ”A” = automatic operation (the heater will set the speed according to the ambient temperature;

• ”Hi” = ultra-fast operation (to be used only if there is a need to heat an environment quickly);

c) Press the key to conrm the settings.

Iftheright[r]orleft[L]rearfansareselected,youcanonlysetthevaluesofONandOFF.

IntheeventthatthecentralfanwassettoOFFandatleastoneofthetworearfansisON,thecentralfanwill

automaticallysetitselftotheminimumsetting.

 

Setting this value denes the desired room temperature, read directly by a probe tted on the stove.

To set the desired temperature:

a) Use the buttons to go to the temperature menu and press ;

b) The current value will ash; change it using the buttons

c) Press to conrm the settings.

Palazzetti ECOFIRE series Use And Function

Other manuals for Palazzetti ECOFIRE series