Pall PCM500 Series User Manual

Contents
Section 1 Describes the environmental, mechanical and electrical aspects of the PCM500
monitor to include product specifications.
Section 2 Inspection, packaging and guidance note
Section 3 Description of the PCM500 monitors main items
Section 4 PCM500 principle of operation
Section 5 Pre-check and connection of the PCM500 to a fluid system
Section 6 General operation of the PCM500 monitor, including communications to
peripheral devices.
Section 7 Provides communication protocol for PLC control through RS232 Com port
Section 8 Details the fluid change procedure
Section 9 Describes the PCM500 monitor function codes, possible causes and corrective
actions.
Section 10 Spare parts list
Section 11 Covers the disposal of equipment
Appendix A Details the Pall PCM500 series worldwide aftermarket and calibration service.
Appendix B Details the Mesh Screen Manifold exchange procedure
MANUAL PART NUMBER ISSUE DATE
MA-PCM500 (Draft) 31/08/2015
3

Pall PCM500 Series Specifications

General

Brand	Pall
Model	PCM500 Series
Category	Monitor
Language	English