Section 1: Pall PCM500 and PCM500W Fluid
Cleanliness Monitors
Specification and Requirements
1.6 Product Specification
Weight 11 Kg (24 lb)
Dimensions 400 x 260 x 250 mm (15.75” x 10.2” x 10“)
Monitoring range ISO4406 11/9/7 to 23/21/17
Monitoring range SAE AS4059F Table 1
(NAS1638) 1 to 12
Monitoring range SAE AS4059F Table 2 >4µm: 1 to 12, >6µm: 1 to 12 and >14µm:
1 to 12
Accuracy ±1/2 ISO4406 Code
Water-in-Oil (PCM500W only) %rh. ± 2% at 5 to 95%rh (non-condensing)
(PPM switchable but requires C1, C2, 0 to 100% full range
C3 & C4 fluid constant input. Contact
PALL representative).
Enclosure Material and Flammability ABS UL94 V-0
Enclosure Gasket Seals Silicone Rubber
Noise Level <70 dBA
Foreseen misuse of equipment
Within this manual are cautions and warnings to highlight potential dangers associated
with operation of the PCM500. Here are a few points of note on misuse of the
equipment.
A danger to the user can arise from connecting the PCM500 to a pressured system
above the working limit, and / or, using an incorrect high-pressure connection.
Damage to the PCM500 can occur from using incompatible fluids.
A danger to the user and damage to the PCM500 can be from an incorrect mains
voltage supply.
9
To Next Page
Loading...
Need help?
General