Charging the battery
Before using your Treo, you need to charge the battery. It may not turn on at
all when you first remove it from the box. We recommend three hours for a
full charge, or until the LED is solid green.
1. Plug the AC charger into a wall outlet. If necessary, connect an adapter.
2. Connect the charger cable to the bottom of the Treo with the word UP
facing the same way as your Treo screen.
A. LED
3. To confirm your Treo is charging, check the LED.
• When the LED is solid red, your Treo is charging.
• When the LED turns solid green, your Treo is fully charged.
• If the LED does not turn on when you connect your Treo to the
charger, double-check the cable connection and the electrical outlet
to which it is connected.
After you turn on your Treo, the onscreen battery gauge displays power status:
• Full battery icon : Battery is charged
• Partial battery icon : Battery has some power and is not charging
• Empty battery icon : Battery needs charging immediately
• Red lightning bolt : Charging
• Green lightning bolt with full battery : Fully charged
12 :: Charging the battery
Inserting the SIM card
Your Subscriber Identity Module (SIM) card contains account information such
as your phone number and voicemail access number. To use the phone, email,
or web features of your Treo, you need to insert the SIM card. If a SIM card
did not come with your Treo, your mobile service provider will give you one
when you subscribe. If you have an older, 5-volt SIM card, you should request
a newer, 3-volt SIM. This Treo is not compatible with older 5-volt SIM cards.
A. SIM tray
B. SIM card
C. Notches
D. SIM slot
1. Slide the SIM tray out of the Treo.
2. Insert the SIM card into the SIM tray by aligning the notches until you
feel it lock into place.
3. Slide the SIM tray back into the Treo.
4. If your SIM card is not already activated, follow the activation steps
provided by your mobile service provider or contact them directly for
assistance. If you want to use email, web browsing, and MMS, be sure to
confirm that your SIM card is activated for data services.
Battery consumption varies
based on your personal
usage. Consumption factors
include signal strength,
backlight and speakerphone
usage, and whether calls
are data or voice calls.
Your mobile service
provider may already have
inserted the SIM card into
your Treo. In that case,
skip to page 14.
To remove the SIM card,
pull the SIM tray out of the
slot and remove the card
from the tray.
Inserting the SIM card :: 13
To Next Page
Loading...
