Palm Z22 - Initial Handheld Setup and Connection

Palm
®
Z22 Handheld 4
CHAPTER 1 Setting Up Your Handheld and Your Computer
Step 1: Charging your handheld
0
1 Plug the AC charger into an
outlet and connect it to the
handheld.
2 Charge your handheld for three hours. Be sure your handheld is fully charged
before going on to Step 2.
Done
Before You Begin
[ ! ]
If you’re upgrading from
another Palm Powered™
device, synchronize your
old handheld with your
old desktop software.
Tip
After the initial charge,
charge your handheld at
least half an hour every
day.