thoroughly.
2. This appliance must be installed in accordance with:
a. Local Gas Fitting Regulations
b. Municipal Building Codes
c. Australian Standard for Gas Appliance Installations AS/NZS5601.1:-2010
d. Any other relevant Statutory Regulation
e. Manufacturer’s installation instructions
3. This appliance must serviced by a qualified person.
4. Room heater application: This unflued gas portable convection heater is designed for use in a
single family domestic dwelling for the purpose of room heating. Its use in an application other
than this may shorten its life.
To Next Page
Need help?
General
