To Next PageTo Next PageWhy Paloma Room heater smells or smokes when using first time?
If your Paloma Room heater smells or smokes when used for the first time, this is likely due to oil used during manufacturing. Operate the heater for a while in a ventilated room to dissipate the smell or smoke.
How to troubleshoot a Paloma Gas Heater that won't turn on?
If your Paloma Gas Heater doesn't operate and the ON/OFF light doesn't glow green, check the following: * Ensure the power cord is plugged in and the power is on. * See if a circuit breaker or fuse has blown. * Verify that the child lock is not set. * Confirm that the gas is turned on. * Make sure there is enough gas left in the LPG tank (if using an LPG appliance).
Why won't my Paloma Gas Heater ignite?
If your Paloma Gas Heater does not ignite and the ON/OFF light does not glow red, it may be because the supply gas valve is not fully opened or there is air in the gas hose.
Why does my Paloma PJC-C25FR Heater smell like gas?
If you smell gas, it could be due to a hose that is not securely connected or is damaged. Ensure the hose is properly connected. If the issue persists, turn off the Paloma heater and call a qualified person.
Why does my Paloma PJC-C25FR smell during use?
If the Paloma heater smells during use, it might be due to recent painting, waxing, or polishing in the room. Ventilate the room properly before use to resolve this issue.
How to fix Paloma Room heater that does not ignite?
If your Paloma Room heater isn't igniting and the ON/OFF light doesn't glow red, check that the supply gas valve is fully opened. Another possible cause is air in the gas hose.
Why Paloma Room heater turns off during operation?
Your Paloma Room heater might be turning off during operation due to a clogged air filter, which will cause the filter lamp to flash; in this case, clean the air filter. Also, make sure that the hot air outlet is not blocked.
What to do if Paloma Room heater smells gas?
If you smell gas from your Paloma Room heater, it could be due to a hose that is not securely connected or a damaged hose. In both cases, you must turn off the heater and call a qualified person.
What to do if my Paloma PJC-C25FR Heater turns off during operation?
If your Paloma heater turns off during operation, it could be due to a clogged air filter. Clean the air filter. Also, make sure that the hot air outlet is not blocked.
Why does my Paloma Gas Heater smell or smoke when using it for the first time?
The smell or smoke comes from oil used during manufacture. Operate the heater for a while in a ventilated room.
Illustrates the front and rear views of the heater, highlighting key components.
Details the buttons, display screen, and indicator lights on the heater unit.
Explains the functions and operation of the separate remote control unit.
Lists the primary functionalities such as efficiency rating, ignition, and economy modes.
Describes the built-in safety mechanisms like anti-tilt and overheat protection.
Essential steps before installation, including unpacking and gas type verification.
Warnings on gas type, room sizing, and electrical connection for safe setup.
Explains safety levels and immediate actions for emergencies like gas leaks or fires.
Lists actions and items to avoid during operation to prevent hazards and damage.
Advises on safe handling, placement, and avoiding specific environmental conditions.
Specifies mandatory clearances from walls, outlets, and acceptable installation locations.
Covers daily checks, recommended servicing, and basic cleaning procedures.
Step-by-step guide for removing, cleaning, and refitting the air filters.
Procedures for powering the unit on and off, including post-operation fan activity.
Explains the economy mode and how to adjust the desired room temperature.
Instructions on how to override timers and use the remote control features.
Detailed steps for setting the heater's internal clock for accurate timer functionality.
Step-by-step instructions for setting the ON and OFF times for Timer 1 and Timer 2.
How the heater automatically warms the room before a programmed start time.
Detailed steps and indicator light explanations for timer operation.
Procedures to deactivate timers and enable/disable the child lock feature.
Lists common issues, probable causes, and suggested remedies for troubleshooting.
Explains diagnostic error codes displayed by the heater and their corresponding solutions.
Details the warranty provider, coverage period, and general terms of the appliance warranty.
Lists specific conditions and causes of failure not covered by the warranty.
Outlines the conditions and requirements for successfully making a warranty claim.
Information on contacting Rheem Service for repairs and obtaining spare parts.
General
