Why Paloma Room heater smells or smokes when using first time?
If your Paloma Room heater smells or smokes when used for the first time, this is likely due to oil used during manufacturing. Operate the heater for a while in a ventilated room to dissipate the smell or smoke.
How to troubleshoot a Paloma Gas Heater that won't turn on?
If your Paloma Gas Heater doesn't operate and the ON/OFF light doesn't glow green, check the following: * Ensure the power cord is plugged in and the power is on. * See if a circuit breaker or fuse has blown. * Verify that the child lock is not set. * Confirm that the gas is turned on. * Make sure there is enough gas left in the LPG tank (if using an LPG appliance).
Why won't my Paloma Gas Heater ignite?
If your Paloma Gas Heater does not ignite and the ON/OFF light does not glow red, it may be because the supply gas valve is not fully opened or there is air in the gas hose.
Why does my Paloma Heater smell like gas?
If you smell gas, it could be due to a hose that is not securely connected or is damaged. Ensure the hose is properly connected. If the issue persists, turn off the Paloma heater and call a qualified person.
Why does my Paloma Heater smell during use?
If the Paloma heater smells during use, it might be due to recent painting, waxing, or polishing in the room. Ventilate the room properly before use to resolve this issue.
How to fix Paloma Room heater that does not ignite?
If your Paloma Room heater isn't igniting and the ON/OFF light doesn't glow red, check that the supply gas valve is fully opened. Another possible cause is air in the gas hose.
Why Paloma Room heater turns off during operation?
Your Paloma Room heater might be turning off during operation due to a clogged air filter, which will cause the filter lamp to flash; in this case, clean the air filter. Also, make sure that the hot air outlet is not blocked.
What to do if Paloma Room heater smells gas?
If you smell gas from your Paloma Room heater, it could be due to a hose that is not securely connected or a damaged hose. In both cases, you must turn off the heater and call a qualified person.
What to do if my Paloma PJC-W25FR turns off during operation?
If your Paloma heater turns off during operation, it could be due to a clogged air filter. Clean the air filter. Also, make sure that the hot air outlet is not blocked.
Why does my Paloma Gas Heater smell or smoke when using it for the first time?
The smell or smoke comes from oil used during manufacture. Operate the heater for a while in a ventilated room.
Details the physical layout of the heater, showing front and rear views with labeled components.
Illustrates and labels the controls on the main unit's panel.
Details the buttons and functionality of the remote control unit.
Lists the primary functionalities and specifications of the heater, such as efficiency and timers.
Describes the built-in safety mechanisms designed to protect the user and the appliance.
Presents a comparative table of specifications across different Paloma/Rheem heater models.
Outlines essential steps and checks before commencing the installation of the heater.
Provides specific legal and installation requirements for customers in Victoria.
Explains the meaning of Danger, Warning, and Caution labels and outlines immediate actions for gas leaks.
Details specific actions to avoid during operation to prevent fire, explosion, or appliance damage.
Provides guidance on safe handling, placement, and electrical precautions for the heater.
Specifies mandatory clearances, location restrictions, and installation procedures for the heater.
Details daily checks, points to inspect, and methods for cleaning the heater's casing and louvres.
Explains how to clean and refit the air filters, including warnings about operation without filters.
Advises on the recommended frequency for professional inspection and service of the heater.
Provides step-by-step instructions for turning the heater on and off, including post-operation fan cooling.
Explains the automatic economy mode that reduces temperature subtly to increase efficiency.
Details how to adjust the desired room temperature and interpret the displayed room temperature.
Describes how to manually override the programmed timer settings for flexible operation.
Explains the basic functions controllable via the infrared remote, such as ON/OFF and timer activation.
Guides the user through the process of setting the internal clock for timer functions to operate correctly.
Detailed steps for programming the ON and OFF times for both Timer 1 and Timer 2.
Instructions for setting the ON and OFF times for Timer 2, following the programming steps.
Details the final steps to confirm timer settings and activate them for operation.
Explains the pre-heat feature that warms the room before the programmed start time.
Illustrates the process of activating and operating timers directly from the heater's control panel.
Provides methods to cancel or disable previously set timer programs.
Explains how to activate and deactivate the child lock feature to prevent accidental operation.
A table listing common operational problems and their suggested remedies for self-resolution.
Lists specific error codes, their associated problems, probable causes, and suggested remedies.
Outlines the general terms and conditions provided by Rheem Australia for the heater warranty.
Details specific conditions and circumstances under which the warranty may not apply.
Specifies what is not covered by the warranty, including misuse, improper installation, and wear and tear.
Details which components are covered and the duration of the warranty for different installation types.
Explains the requirements for making a warranty claim and the steps involved in the process.
Clarifies consumer rights under Australian law and how they relate to the manufacturer's warranty.
Information on accessing service, spare parts, and troubleshooting assistance from Rheem.
Confirms the heater's certification by the Australian Gas Association and notes policy on product improvement.
General| Model | PJC-W25FR |
|---|---|
| Category | Heater |
| Fuel Type | Propane |
| BTU | 25, 000 BTU |
| Safety Features | Tip-over switch |
To Next Page
