What to do if I smell gas from my Paloma PG-311F Heater?
If you smell gas, immediately turn off the Paloma heater and contact a licensed plumber to inspect the hose connections and condition.
How to troubleshoot a Paloma Heater that does not operate?
If your Paloma heater isn't working, make sure the power cord is properly plugged in and the power is switched on. Also, check if the circuit breaker or fuse has blown. Finally, ensure that the gas supply is turned on and, if it's an LPG appliance, that there's sufficient gas in the tank.
Why is my Paloma PG-311F Heater not heating the room adequately?
If the room temperature isn't rising enough with your Paloma heater, check that the filter isn't clogged with dust and that the room temperature setting is correct. Also, make sure the hot air outlet is not blocked.
What to do if the flame is extinguished during operation of Paloma PG-311F Heater?
If the flame goes out during operation of your Paloma heater, it might be due to insufficient oxygen in the room. Ensure the room is well-ventilated.
Why does my Paloma PG-311F Heater smell during use?
If your Paloma heater smells during use, especially if the room has been recently painted, waxed, or polished, it will give out a strong odour. Ensure the room is properly ventilated before use.
What to do if Combustion Light (Red) does not light on Paloma PG-311F?
If the Combustion Light (Red) on your Paloma heater doesn't light up, check that the air filter isn't clogged with dust and that the hot air outlet isn't blocked.
What to do if Operation Light (Green) does not light on Paloma Heater?
If the Operation Light (Green) on your Paloma heater isn't lighting up, check for a power failure.
Defines the terms and periods for domestic and commercial warranty coverage.
Lists circumstances and damages that will void the appliance's warranty.
Illustrates the main external physical components and connections of the heater.
Details the user interface, buttons, and indicator lights on the heater.
Provides technical data including dimensions, gas input, output, and room sizing.
Outlines essential steps and checks before operating the heater for the first time.
Highlights critical hazards that could result in serious injury or death if not avoided.
Lists important precautions to prevent potentially hazardous situations and serious injury.
Indicates potential hazards that may result in minor injury if not avoided.
Specifies minimum clearances, ventilation, and placement guidelines for safe installation.
Step-by-step guide for turning the heater on and achieving ignition.
Explains how to set and control the desired room temperature using selection buttons.
Provides instructions for safely shutting down the heater and fan cooldown.
Details how to adjust the direction of heated air flow using the louvre plate.
Explains how to activate and the function of the energy-saving economy mode.
Guide on cleaning the air filter when the filter light indicates it is needed.
Explains the meaning of LED light patterns for diagnosing issues.
Describes various safety features like tilt, overheat, power failure, and filter protection.
Lists key points to check before and during operation for safety and performance.
Provides instructions for cleaning the outer casing, louvres, and air filters.
Lists phone numbers for service and spare parts across different Australian states.
Details the Australian Gas Association approval number for the models.
To Next Page
General
