Available from A1 Security Cameras
www.a1securitycameras.com email: sales@a1securitycameras.com
Network Dome Camera Quick Operation Guide
Fix the mounting base to the ceiling with screws.
Figure 2-4 Fix the Mounting Base
Adjust the surveillance angel.
Loosen the tilt adjusting screws, and adjust the tilt angel [0~65], and
tighten the tilt adjusting screws.
Hold the black liner and rotate it to adjust the pan position [0~360].
Remove the black liner and rotate the camera to adjust the azimuth
angle [0~360].
Tilt Adjusting Screw
Figure 2-5 3-axis Adjustment
To Next Page
Loading...
