Panasonic AW-UE100 User Manual (English)

Questions and Answers:

L
Leroy WalkerAug 16, 2025
What to do if Panasonic AW-UE100 cannot be operated via remote or controller?
- N
  Natasha CollinsAug 16, 2025
  If you cannot operate your Panasonic Security Camera using either the wireless remote control or a controller, first check if the unit's power is on. If the status display lamp is off or lights up orange, the unit's power is not on. The safe mode function may have been activated. Also, limiter functions may have been set. Finally, make sure that the unit you want to operate has been properly selected.
M
Matthew StoutAug 25, 2025
Why do Panasonic Security Camera screen displays take a long time to appear?
- J
  jonathanromeroAug 26, 2025
  If screen displays are slow to appear on your Panasonic Security Camera, it may be due to accessing in HTTPS mode, which requires more signal processing. If the unit is on the same local network and being accessed via proxy, configure the web browser settings to disable proxy access. Also, if multiple users are accessing the unit's IP images simultaneously, this can slow down image display and reduce the IP image frame rate.
A
adamsmithAug 27, 2025
Why Panasonic Security Camera wireless remote control is not working?
- A
  Angela HarringtonAug 27, 2025
  If your Panasonic Security Camera is not responding to the wireless remote control, start by checking the batteries. If the status display lamp does not blink when operating the remote near the signal light-sensing area, the batteries may be depleted or installed with reversed polarities. Replace them with fresh batteries. Check that the IR ID switches have been correctly configured. Also, check for interference from nearby fluorescent lights or plasma monitors. If the signal light-sensing area is exposed to their light, it may disrupt the remote control's signal.
J
Jennifer MeyerAug 30, 2025
What to do if Panasonic AW-UE100 Security Camera web settings are not updating?
- L
  leemanuelAug 30, 2025
  If the settings on the web setup screen of your Panasonic Security Camera are not updating or displaying correctly, for Windows, press the [F5] key to refresh the settings. For Mac, press [Command] + [R]. Clear temporary internet files. For Windows, go to Internet Explorer, select [Tools] - [Internet Options], click the [General] tab, and delete temporary internet files under [Browsing history]. For Mac, in Safari, select [Develop] - [Empty Cache]. Ensure that [Check for newer versions of stored pages] is set to [Every time I visit the webpage] in Internet Explorer's temporary internet file settings. Finally, the unit’s ports may be filtered by the firewall or other function of the anti-virus software. Change the HTTP port number of the unit to a port number that will not be filtered.
J
Jennifer AndrewsSep 3, 2025
Why does Panasonic AW-UE100 authentication screen appear repeatedly?
- S
  stephanie36Sep 3, 2025
  If the authentication screen appears repeatedly on your Panasonic Security Camera, it may be because the username or password was changed while the unit was being accessed from a separate web browser. The authentication screen will appear each time the screen display is changed. If you change the [User auth.] - [Authentication] setting, close the web browser and initiate access again.
S
Sarah WellsSep 5, 2025
How to fix Panasonic Security Camera when setting files cannot be downloaded?
- R
  Ricky SummersSep 5, 2025
  If you cannot download setting files on your Panasonic Security Camera, for Windows, check if the file download function has been disabled in Internet Explorer. To enable it, go to [Tools] - [Internet Options], click the [Security] tab, and then click the [Custom level] button. In the [Security Settings] dialog box, select the [Enable] option for [File download].
M
Matthew CunninghamSep 9, 2025
Why Panasonic Security Camera tally lamps do not light?
- J
  Jennifer SkinnerSep 9, 2025
  If the tally lamps on your Panasonic Security Camera do not light, check if the [Tally] setting is set to [Disable]. If it is, change the setting to [Enable].

Panasonic AW-UE100 Specifications

General

Camera Type	PTZ Camera
Video Output	HDMI, 3G-SDI, IP
Zoom	20x optical zoom
Digital Zoom	10x
Tilt Angle	-30° to +90°
IP Streaming	Yes
Image Sensor	1/2.5-type MOS sensor
Effective Pixels	Approximately 8.3 megapixels
Low Light Performance	0.5 lx (Color), 0.03 lx (B/W)
Network Protocols	RTSP, RTMP
Focal Length	4.7 mm to 94 mm
Horizontal Resolution	1000 TV lines
Minimum Illumination	0.5 lx (50 IRE, F1.8, 1/30 sec)
Power Consumption	Max 45W