- 77 -
∫ To watch images on a regular
TV (4:3) or when both sides of
the images do not appear on
the screen
Change the menu setting to display the images
correctly. (Check the TV setting.)
≥ When aspect ratio is set to [4:3] and this
device and a television are connected,
sometimes some icons may not be displayed
on the television.
Example of images with a [16:9] aspect ratio
on a regular TV (4:3)
* The screen is displayed this way when [TV
ASPECT] is set to [4:3] and [DOWN CONV.]
is set to [LETTERBOX]. (l 108)
≥ If a wide-screen TV is connected, adjust the
aspect setting on the TV. (Refer to the
operating instructions of the TV for details.)
≥ When [4:3] is set, the aspect ratio of an
image displayed on the TV can be changed
through the [DOWN CONV.] setting.
≥ When [DOWN CONV.] is set to [SIDE
CROP], the sides of an image will be cut off,
causing some icons on the TV to be hidden
from the TV screen.
∫ To display the on-screen
information on the TV
When the menu setting is changed, the
information displayed on the screen (operation
icon and Counter display etc.) can be
displayed/not displayed on the TV.
≥ It can also be switched by the On-screen
display button on the wireless remote control.
(l 25)
: [OTHER FUNCTION] #
[TV ASPECT] # [4:3]
[TV ASPECT] setting
[16:9] [4:3]
*
: [SW & DISP SETUP] #
[VIDEO OUT OSD] # [ON] or [OFF]
MENU
AG-AC90A-SQT0333_mst.book 77 ページ ２０１４年５月１４日 水曜日 午前１０時３６分
To Next Page
Loading...
