Panasonic AG-AC90AP - Page 90

- 90 -
≥ This function’s default setting is [SCENE1].
≥ It is possible to switch the scene file by touching to while displaying the operation icons.
(l 64)
≥ It will return to the default settings when [SCENE] is selected in [INITIAL SET]. (l 109)
Adjusts the level of the image outline correction.
1 Touch [DETAIL LEVEL].
2 Touch / to adjust settings.
3 Touch [EXIT] to exit the menu screen.
Adjusts the degree of vertical outline correction in images.
1 Touch [V DETAIL LEVEL].
2 Touch / to adjust settings.
3 Touch [EXIT] to exit the menu screen.
Adjusts the level to eliminate the noise of the detail.
1 Touch [DETAIL CORING].
2 Touch / to adjust settings.
≥ Setting to s direction gives crisp images but allows a slight increase in noise. Setting in the r
direction reduces noise.
3 Touch [EXIT] to exit the menu screen.
Adjusts color density.
1 Touch [CHROMA LEVEL].
2 Touch / to adjust settings.
3 Touch [EXIT] to exit the menu screen.
Adjusts color balance.
1 Touch [CHROMA PHASE].
2 Touch / to adjust settings.
3 Touch [EXIT] to exit the menu screen.
[DETAIL LEVEL]
[V DETAIL LEVEL]
[DETAIL CORING]
[CHROMA LEVEL]
[CHROMA PHASE]
SCN1
SCN6
AG-AC90A-SQT0333_mst.book 90 ページ ２０１４年５月１４日 水曜日 午前１０時３６分