19
(ENG) VQT4M93
Connecting to the AC outlet
The unit is in the standby condition when the AC adaptor is connected. The primary circuit is always
“live” as long as the AC adaptor is connected to an electrical outlet.
Important:
≥ Use the supplied AC adaptor. Do not use the AC adaptor of another device.
≥ Do not use the AC cable with any other equipment as it is designed only for this unit. Also,
do not use the AC cable from other equipment with this unit.
≥ Insert the plugs as far as they will go.
1 Connect the AC cable to the AC
adaptor and the AC outlet.
2 Connect the AC adaptor to the DC
input terminal [DC IN].
∫ Removing the AC adaptor
≥ Make sure to set the power switch to OFF
and the status indicator is turned off when
disconnecting the AC adaptor.
AG-AC90-VQT4M93_mst.book 19 ページ ２０１２年９月２５日 火曜日 午後１時１５分
To Next Page
Loading...
