30
VQT4M93 (ENG)
Manual shutter speed
Adjust the shutter speed when recording fast-moving subjects.
≥ Switch to Manual Mode. (l 28)
1 Touch the LCD monitor to display the operation icons and touch .
2 Touch / to adjust settings.
≥ When [AUTO] is touched, the shutter speed is set automatically.
≥ Touch to complete the adjustment.
Each of the USER button can register one function from the 12 available functions.
≥ There are three USER buttons (USER1 to USER3) on the main body and four USER button icons
(USER4 to USER7) displayed on the LCD monitor.
Setting the USER button
1 Select the menu.
2 Touch the USER button you wish to set.
≥ The USER button number and currently set function name are displayed. (For example, a display
of 1. [P.AF] means that Push AF has been assigned to USER1 button.)
3 Touch the item to register.
≥ For the functions of the USER button that can be registered, refer to page 31.
≥ Touch [INH] (Inhibit) if not registering.
≥ Next (Previous) page can be displayed by touching / .
≥ To continuously set other USER buttons, repeat steps 2-3.
4 Touch [EXIT] to complete the setting.
Recording
USER button
: [SW & DISP SETUP] # [USER BUTTON SETUP]
SHTR
MENU
A USER1 button
B USER2 button
C USER3 button
D USER4 button
E USER5 button
F USER6 button
G USER7 button
AG-AC90-VQT4M93_mst.book 30 ページ ２０１２年９月２５日 火曜日 午後１時１５分
To Next Page
Loading...
