Panasonic AG-CX7

Chapter 3 Preparation — Attaching accessories
- 27 -
Attaching accessories
Adjusting the grip belt
≥ Adjust the grip belt so that it fits the size of your hand.
≥ If the buckle is difficult to tighten, move the pad backward and tighten the buckle again.
1 Undo the button of the grip belt.
2 Open the buckle section.
3 Pull the end of the belt.
4 Do up the button of the grip belt.
Attaching the lens hood
Removing
1 While pressing the lens hood release button, turn the lens hood in the direction of the arrow to remove it.
Attaching
1 Insert the lens hood into the unit.
≥ Align the mounting marks on the lens hood and unit.
2 Turn the lens hood clockwise.
≥ Turn until the lens clicks and locks into place.
A Button
B Buckle
C Pad
A Lens hood release button
B Mounting mark
22
44
11
33





