Chapter 3 Preparation — Attaching accessories
- 31 -
Attaching the external microphone
∫ Attaching an external microphone to the <INPUT 1>/<INPUT 2> terminals
When the handle unit (supplied) is attached to the unit, you can attach an external microphone such as a unidirectional microphone AG-MC200G
(optional) that is compatible with XLR terminals to the handle.
1 Open the microphone holder.
2 Attach the external microphone to the microphone holder, then close the buckle to
secure the external microphone.
Attach the fitting to the hook and close the buckle in the direction indicated by the arrow.
3 Connect the microphone cable to the <INPUT 1> terminal A.
4 Attach the microphone cable to the microphone cable clamp B.
5 Switch the <INPUT1> switch to match the microphone to be connected.
0 When removing the microphone cable from the <INPUT 1> terminal, remove by lifting levers C.
To Next Page
Loading...
