EasyManua.ls Logo

Panasonic AG-CX7 - Page 86

Panasonic AG-CX7
208 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Chapter 4 Operation Menu settings
- 86 -
[IP ADDRESS]
Sets the IP address.
(Factory setting: [192.168.0.1])
@
NOTE
0 Cannot be set when [USB-LAN IPv4 SETTING] [DHCP] [CLIENT] is selected.
[SUBNET MASK]
Sets the subnet mask.
(Factory setting: [255.255.255.0])
@
NOTE
0 Cannot be set when [USB-LAN IPv4 SETTING] [DHCP] [CLIENT] is selected.
[DEFAULT GATEWAY]
Sets the default gateway.
(Factory setting: [192.168.0.254])
@
NOTE
0 Cannot be set when [USB-LAN IPv4 SETTING] [DHCP] [CLIENT] is selected.
[PRIMARY DNS]
Sets the primary DNS server.
(Factory setting: [0.0.0.0])
[SECONDARY DNS]
Sets the secondary DNS server.
(Factory setting: [0.0.0.0])
[USB-LAN IPv6 SETTING]
[ENABLE/DISABLE]
Sets whether to use IPv6.
(Factory setting: [DISABLE])
[DHCP]
Sets whether to use automatic acquisition via DHCP.
(Factory setting: [OFF])
[IP ADDRESS]
Sets the IP address.
(Factory setting: [::])
[PREFIX LENGTH]
Sets the prefix length of the subnet.
(Factory setting: [64])
[DEFAULT GATEWAY]
Sets the default gateway.
(Factory setting: [::])
[PRIMARY DNS]
Sets the primary DNS server.
(Factory setting: [::])
[SECONDARY DNS]
Sets the secondary DNS server.
(Factory setting: [::])
[INFORMATION]
[STATUS]
Displays the status of the network function.
[ENABLE] Uses IPv6.
[DISABLE] Does not use IPv6.
[OFF] Does not use DHCP.
[CLIENT] Performs automatic acquisition through DHCP.
CX10

Table of Contents

Related product manuals