10 Factory Setting
10.1 How To Turn On The Factory Settings?
1.
Set the power switch to ON.
2.
Press the “O.I.S./ USER 3”button, “WHITE BAL”button and “Zoom Lever”to W side for more than 3 seconds until the top
screen of the Service Mode Menu is displayed.
3.
Touch the [ 1 ] of LCD.
4.
Touch the [ YES ] of LCD.
5.
After few seconds “END” is displayed on LCD monitor.
Set the power switch to OFF to turn the unit off.
- 109 -
To Next Page
Loading...
