Description of parts
26
DVQX2032 (ENG)
Handle unit (supplied)
1
Handle
2
Microphone holder mounting section
(l 32)
Attaches the supplied microphone
holder with the microphone holder
mounting screws.
3
Microphone holder (l 32)
Secures the external microphone in
place.
4
Buckle
Used to open and close the microphone
holder.
5
<INPUT 1> terminal (XLR, 3-pin)
Connects an audio equipment or an
external microphone.
6
<INPUT 2> terminal (XLR, 3-pin)
Connects an audio equipment or an
external microphone.
7
Microphone cable clamp
Fixes the external microphone cable.
8
<INPUT1> switch
Switches audio input signals connected
to the <INPUT 1> terminal.
9
CH1 SELECT switch
Selects the audio to be recorded on
audio channel 1.
10
CH2 SELECT switch
Selects the audio to be recorded on
audio channel 2.
11
<INPUT2> switch
Switches audio input signals connected
to the <INPUT 2> terminal.
12
<AUDIO LEVEL CH2> dial
Adjust the recording level of audio
channel 2.
13
<CH2> switch
Selects how the recording level for audio
channel 2 is adjusted.
A With a microphone holder attached
To Next Page
Loading...
