51
6
Set a 6-character filename with the
Operation lever when the following screen
is displayed.
Set the same as user information. (Page 58)
Characters that can be set
Space, A to Z, 0 to 9, : ; < = > ? @ [ ] ^_-./
If the RESET/TC SET button is pressed
when the filename has been set, the
characters are cleared.
7
After you finish setting the filename, push
the Operation lever.
8
Select YES on the confirmation screen.
Selecting YES will close the NAME EDIT
screen and confirm all changes.
Once confirmed, all changed names and
values will be saved even if the power is
switched off or the scene dial is moved.
•
•
•
To Next Page
Loading...
