Panasonic AG-UX90 - Output Setup

29
OUTPUT SETUP
Menu item
Description
Value (Factory default setting underlined)
OUTPUT SEL
(AG-UX180 only)
Select video and audio
output.
HDMI / SDI / AV
RESOLUTION
Set resolution of output
video signal.
SYSTEM /1080p /1080i /DOWN CONV.
The type of signal available on the output
varies and will depend on REC format
setting. See P. 66 for the details.
REMOTE REC
Inserts the REC/PAUSE
trigger signal on SDI
(AG-UX180) or HDMI OUT.
This allows the camera to
control REC/PAUSE
functions of an external
recorder.
ON / OFF
REMOTE REC LINK
Set the way to control the
remote REC/PAUSE of an
external recorder.
ON: Remote REC/PAUSE can be
performed with the REC button.
OFF: Remote REC/PAUSE can be
performed with the user assignable
buttons (AUTO REC function).
SDI EDH
(AG-UX180 only)
EDH signal is embedded in
the SDI stream. Enabled in
576i mode only.
ON / OFF
SDI AUDIO GAIN
CHG
(AG-UX180 only)
Set the audio gain of SDI
embedded audio signal.
0dB / -6dB / -12dB
DOWN CONV.
Set the display mode of a
down converted image.
SIDE CROP / LETTERBOX /
SQUEEZE
HDMI UHD
OUTPUT LIMIT
(AG-UX180 only)
Set the frame rate limit of
HDMI OUT while in
UHD 2160/59.94p 150M
and
UHD 2160/50.00p 150M
record modes.
System freq = 59.94Hz
59.94p: Output in 2160/59.94p
29.97p: Output in 2160/29.97p
System freq = 50.00Hz
50.00p: Output in 2160/50.00p
25.00p: Output in 2160/25.00p
HDMI TC OUTPUT
Insert timecode signal on
HDMI OUT.
ON / OFF
AV OUT
(AG-UX90 only)
Select video and audio
output. HDMI OUT works
when set to OFF.
OFF / ON
H/PHONE MODE
Select audio output mode
on headphones out and AV
out. Choose “LIVE” when
delay is audible between
audio and actual sound.
LIVE / RECORDING
Fixed to “RECORDING” when an HDMI
cable connected.
VOLUME
Headphone volume
adjustments can be made
with the built-in jog dial.
ON / OFF
TEST TONE
Set the test tone level.
OFF / LEVEL1 (loud) / LEVEL2 (low)
LCD/EVF OUTPUT
Set the way to use the LCD
and EVF monitors.
AG-UX180 AUTO/LCD
AG-UX90 LCD / EVF
3. MENU settings