106
Setup Menu: Menu List
Displays the various versions of the unit.
HD SYS H
ADVANCE
Sets whether HD SDI output has the phase advanced 90H in relation to the SD reference
input when there is an SD reference input.
0H
: Outputs with the same phase as the SD reference.
90H: Outputs with the HD SDI output phase advanced 90H from the SD reference output.
Note:
Audio and time codes are output with the same phase as HD SDI output.
OUTPUT REF
Selects the reference for video output.
AUTO
:
Uses the signal input to the REF connector as the reference. When there is no input to the
REF connector, the selected video input signal is used as the reference. When there is no
REF input signal and no VIDEO input signal, the internal clock is used.
REF:
Uses the REF input signal as the reference. If there is no such signal, the internal clock is
used.
INPUT:
Uses the VIDEO input signal as the reference. If there is no such signal, the internal clock is
used.
HOURS METER
Item Settings and brief function description
OPERATION Displays the total time that the power of the unit has been on.
P.ON TIMES Displays the total number of times that the power of the unit has been turned on.
LCD Displays the total time that the LCD monitor of the unit has been lit.
FAN Displays the total time that the fan of the unit has been rotating.
VERSION
Item Settings and brief function description
VERSION Displays the overall firmware version (representative version) of the unit.
MODEL NAME Displays the model name of the unit.
SERIAL NO. Displays the serial number of the unit.
MAC ADDRESS Displays the MAC (Media Access Control) address of the unit.
UID Displays the unique ID of the unit.
Item Settings and brief function description FREQ indications
To Next Page
Loading...
